GB/T 36259-2018 Translated English of Chinese Standard. (GBT 36259-2018, GB/T36259-2018, GBT36259-2018): High aluminum silicate cover glass for touch panelThis Standard specifies classification, requirements, test methods, inspection rules, packaging, marks, transport and storage of high aluminum silicate cover glass for touch panel. This Standard is applicable to colorless and transparent high aluminum silicate cover glass for touch panel of which alumina content is greater than 12%. |
Common terms and phrases
100mm glass 50mm sample acceptance Number according to formula aluminum silicate cover Appearance quality batch of glass box rack Chemical composition Chemical strengthening properties chemical strengthening treatment contact point Curvature depth and surface diagonal difference Exit-factory inspection Float glass glass for touch glass GB/T glass is qualified glass sample Hainan Zhonghang Special high aluminum silicate impact resistance input load piece maximum pressure increase megapascals micro-waviness Microscopic waviness millimeters Nominal thickness Superior number in Table oxide packaging panel shall comply Perform determination according pieces/m2 point defects pressure increase rate products Qualified products provisions of Table Qualified products 0.30mm≤t≤0.70mm Section defect silicate cover glass Single chip specified in GB/T Standard Stress layer depth Superior products Qualified support frame surface stress take 3 pieces take the arithmetic test according test machine thickness deviation Thickness difference thickness Superior products touch panel Type inspection Vickers hardness Visible light transmittance Zhonghang Special Glass